Radar Mounts
Our Radar Mounts are made from a single piece of 316 stainless steel. The entire mount is first electro-polished and then a mirror-finish is buffed onto the outer surface.

Compatible with most modern commercially available 18-24” closed array radar domes including Simrad/Lowrance/B&G 3G/4G/Halo, Raymarine, Humminbird, and Garmin. Please confirm the compatibility of your specific radar by comparing our mounting hole diagram to your radar’s mounting hole template (usually found in the radar’s manual)

Simply pair this mount with a marine cable gland to route the radar cable.

See diagram to see differences between SW1060, SW1076, and SW1077.


Recommended items:

  • Radar Mounting Bolts (sold separately by bolt length)

    • Qty (4) 316SS 3/8”-16 Bolts

  • Marine Grade Sealant

  • Marine Cable Gland

Radar Mount Kits Include:

  • Qty (1) 316SS Radar Mount electro-polished with a mirror finish exterior

  • Qty (4) 316SS M8x1.25mm button cap socket screws 16mm length

  • Qty (4) 316SS M8 Split Lock Washers

  • Qty (4) Polymer Sleeve Washer for 3/8” Bolts

  • Qty (4) 316SS 3/8” Fender Washers

  • Qty (4) 316SS 3/8”-16 Locknuts

  • Product Directions